1. Monopitched roof. A monopitched roof is a single sloping surface or roof plane angled in mere one direction. A split monopitched roof, as on the house seen right here, has two separate, unattached, nonintersecting planes.True North Architects A monopitched roof enables higher ceilings, provides space for clerestory windows (windows above eye degree) underneath the eaves associated with roof and allows architects to lengthen gallery windows on the seams of the house. This allows for an influx of natural light, improved views and a larger feeling of spaciousness inside.Takt | Studio for Architecture

2. Butterfly, or inverted, gable roof. Resembling the wings of a butterfly, this roof consists of two planes that slant down toward each other. The butterfly roof gained popularity within the 1950s and 1960s and it is still used by architects today. the roof that is butterfly the need for traditional gutter and downspout systems, as rainwater drains into the central trough, where it can be harvested. It can also boost the energy efficiency of the homely house, as solar panels could be strategically installed at an angle to maximize the rays of the sun.

3. Oblique roof. Steeply pitched, an roof that is oblique like a giant wing soaring above a building's outer edge. Maxa Design As an roof that is oblique beyond the walls of the house, it gives privacy and shelter for outside entertaining areas while permitting natural light to filter inside.

4. Hyperbolic paraboloid, or seat, roof. A roof that is hyperbolic both ways — following a convex curve about one axis and a concave curve about the other. The tension makes the roof appear as if it is stretched from corner to corner, creating a form that is seemingly organic.




The roof requires minimal contact with exterior walls and no internal supports, as can be seen in this awning that shades a rooftop terrace while progressive architects first used the hyperbolic paraboloid roof in the 1950s and 1960s, it still evokes a modern aesthetic today.London Garden Designer Because of its tensioned and curved structure.




The hyperbolic roof is perfect for property owners who want an open, light and economic building.

5. A sawtooth roof is a few ridges made up of a vertical glass screen that meets a roof that is pitched. The name, obviously, refers to the fact that these roofs look like the teeth on a saw; they may have a single” that is“tooth numerous “tooths.”Liminal Studio Architects utilized sawtooth roofs in 19th-century factories before the days of electric lighting, when daylight needed to reach the deep, dark recesses of the buildings. A roof that is sawtooth effectively exploits daylight, permitting natural light and warmth to spread further to the house.

Good-looking Entry hall design entry mediterranean with dramatic entry tall dor glass and steel door door mat
dramatic entry tall dor glass and steel door door mat
Outstanding Entry hall design bathroom mediterranean with curved vanity curved vanity soft fold roman shades m
curved vanity curved vanity soft fold roman shades m
Astonishing Entry hall design entry transitional with front hall area rug engineered floor second life
front hall area rug engineered floor second life
Extraordinary Entry hall design entry traditional with woven area rug frame and panel woodwork wood paneling w
woven area rug frame and panel woodwork wood paneling w
Fabulous Entry hall design entry transitional with glass pendants high ceiling glass pendants venetian plaster
glass pendants high ceiling glass pendants venetian plaster